News

  • How to use the chain saw

    Chainsaw is short for “gasoline chainsaw” or “gasoline powered saw”. Can be used for logging and forging. Its sawing mechanism is the saw chain. The power part is a gasoline engine. It is easy to carry and easy to operate. Operation steps of chain saw: 1. First, start the ...
    Read more
  • Chainsaw operation and precautions

    Operation method: 1. When starting, gently pull up the starter handle by hand until it reaches the stop position, then pull it quickly and firmly while pressing down on the front handle. NOTE: DO NOT pull the start cord as far as it will go, or you may pull it off. 2. Do not let the starter handl...
    Read more
  • The problems you easily overlook when using the chainsaw are here

    01. Use reliable lubricating oil For chain saw use, lubrication of the chain and guide bar is very important. The chain must always have a small amount of oil thrown out, never work without the chain being lubricated. If the chain runs dry, the cutting tool can quickly become damaged beyond repai...
    Read more
  • Chain saw

    Chain saw, also known as chainsaw, is a portable saw powered by a gasoline engine. It is mainly used for logging and wood building. Its working principle is to perform shearing action by the lateral movement of the staggered L-shaped blades on the saw chain. Chain saws are generally divided into ...
    Read more
  • For cutting wood of Chainsaw

    One of the earliest patents for an “endless chain saw” comprising a chain of links carrying saw teeth was granted to Frederick L. Magaw of Flatlands, New York in 1883, apparently for the purpose of producing boards by stretching the chain between grooved drums. A later patent incorpor...
    Read more
  • Power transmission of brush cutter

    Two pairs of power transmission belts are installed on the power take-off pulley. The forward belt transmits the power to the cutting system, which is called the cutting power belt, and the backward belt transmits the power to the walking system, which is called the walking power belt. The cuttin...
    Read more
  • Power system of brush cutter

    From the development status of such products, there are two main forms of power system, one is the traditional conventional internal combustion power system represented by small gasoline engines or diesel engines. The characteristics of this kind of power system are: high power and long continuou...
    Read more
  • Classification of Lawn mower

    According to different classification standards, lawn mowers can be divided into the following categories: 1. According to the travel: intelligent semi-automatic towing type, rear push type, mount type, tractor suspension type. 2. According to the power points: human and animal power drive, engin...
    Read more
  • The effect of lawn mowers

    Develop agricultural mechanization, improve work efficiency, and improve agricultural production efficiency. In a big agricultural country like ours, it seems that it is an important tool. As a tool in agricultural production, the lawn mower has the most direct impact on the yield of crops. Its i...
    Read more
  • History of lawnmower

    It’s been around since 1805, when lawnmowers were manual, not powered. In 1805, the Englishman Placknett invented the first machine for harvesting grains and cutting weeds. The machine was driven by a person, and the rotary knife was driven by a gear drive to cut the grass. This is the prot...
    Read more
  • Side Mount brush cutter

    Durable reason: brush cutter (1) Theoretically speaking, using roughly the same engine to achieve the same function, the more complex the structure, the more failure factors, and the more complex the piggyback structure, so it is prone to problems. In actual use, too, the backpack is prone to pro...
    Read more
  • Safety Operating Regulations of Chainsaw

    1. Wear work clothes and corresponding labor protection products as required, such as helmets, protective glasses, gloves, work shoes, etc., and brightly colored vests. 2. The engine should be turned off when the machine is being transported. 3. The engine must be turned off before refueling. Whe...
    Read more
123456 Next > >> Page 1 / 6