News
-
Saw season 1 episode 11 release date, time and where to watch
Chainsaw Man episode 10 gave fans a week of respite without worrying about the safety of their favorite characters. However, that doesn’t mean the episode is boring as we see Power (Voiced by Fairuz Ai) and Denji (Voiced by Kikunosuke Toya) with a very talented demon hunter named Kishibe (...Read more -
The electric chain saw motor does not rotate
1. Check whether the electric chain saw is short of oil, which makes the chain dry and stuck, causing it unable to rotate normally. 2. Check whether the motor power supply is in place and connected. 3. Check whether there is a problem with the carbon brush of the motor. Poor contact of the carbon...Read more -
When the electric chain saw is idling, the chain wheel is rotating. Why is it that the chain wheel stops rotating after the guide plate and chain are installed?
1. Check whether the electric chain saw is short of oil, which makes the chain dry and stuck, causing it unable to rotate normally. 2. Check whether the motor power supply is in place and connected. 3. Check whether there is a problem with the carbon brush of the motor. Poor contact of the carbon...Read more -
What are the operation steps and precautions of chain saw?
1. Before use, you must carefully read the operating instructions of the chain saw to understand the characteristics, technical performance and precautions of the chain saw. 2. Fill up the fuel tank and oil tank before use; Adjust the tightness of the saw chain, neither too loose nor too t...Read more -
Common Faults and Troubleshooting of Chain Saw
1. If the chain saw stops running after refueling, works less vigorously, or the heater overheats, etc It is generally the problem of the filter. Therefore, the filter shall be checked before work. The clean and qualified filter shall be clear and bright when it is aimed at sunlight, other...Read more -
The reasons why the chain saw can not be started
The reasons why the chain saw can not be started are: 1. The wrong operation method caused the chain saw to flood the cylinder. Strictly speaking, it is not a fault, and there are many such things; 2. Whether the fuel ratio is correct; 3. The spark plug may not have electricity; 4. ...Read more -
Advantages of The four stroke gasoline saw
The four stroke logging tool gasoline saw has several advantages: 1. It does not need to add pure gasoline in proportion, does not pull the cylinder, and is more durable, convenient and simple. 2. Imported crankshaft, super fuel saving carburetor, high temperature resistance, stable operation and...Read more -
How to use the chain saw
Chainsaw is short for “gasoline chainsaw” or “gasoline powered saw”. Can be used for logging and forging. Its sawing mechanism is the saw chain. The power part is a gasoline engine. It is easy to carry and easy to operate. Operation steps of chain saw: 1. First, start the ...Read more -
Chainsaw operation and precautions
Operation method: 1. When starting, gently pull up the starter handle by hand until it reaches the stop position, then pull it quickly and firmly while pressing down on the front handle. NOTE: DO NOT pull the start cord as far as it will go, or you may pull it off. 2. Do not let the starter handl...Read more -
The problems you easily overlook when using the chainsaw are here
01. Use reliable lubricating oil For chain saw use, lubrication of the chain and guide bar is very important. The chain must always have a small amount of oil thrown out, never work without the chain being lubricated. If the chain runs dry, the cutting tool can quickly become damaged beyond repai...Read more -
Chain saw
Chain saw, also known as chainsaw, is a portable saw powered by a gasoline engine. It is mainly used for logging and wood building. Its working principle is to perform shearing action by the lateral movement of the staggered L-shaped blades on the saw chain. Chain saws are generally divided into ...Read more -
For cutting wood of Chainsaw
One of the earliest patents for an “endless chain saw” comprising a chain of links carrying saw teeth was granted to Frederick L. Magaw of Flatlands, New York in 1883, apparently for the purpose of producing boards by stretching the chain between grooved drums. A later patent incorpor...Read more